WikiCooling is reader-supported. When you buy through our links, we may earn a commission. It never affects our rankings. Learn more›

Keystone KSTAT10-1E Review: 10,000 BTU 115V Wall AC

A 115V cooling-only wall unit rated 10,000 BTU for rooms up to 450 sq ft, with a 50.2 dB listed sound level, 2.3 pints per hour of moisture removal and a follow me remote.

The Keystone KSTAT10-1E is a 10,000 BTU cooling-only wall air conditioner for rooms up to 450 square feet that runs on a standard 115 volt outlet. Its two standout features are a low 50.2 dB listed sound level and a remote with a built-in thermostat that reports the temperature where you sit. It has a perfect 5.0 out of 5 average from 10 ratings so far, a small but encouraging start in our cooling-only through-the-wall air conditioners category.

Our Verdict

The KSTAT10-1E is a strong bedroom and small living room unit. It is quieter on paper than most conventional 10,000 BTU wall units, removes up to 2.3 pints of moisture per hour, and adds energy saver mode, sleep mode, a 24 hour timer and a check filter alert. The follow me remote fixes the common problem of a wall unit sensing temperature next to a warm outside wall rather than in the room.

It has no Wi-Fi, no inverter and no heat, and the listing does not mention a sleeve, so plan for one. With only 10 ratings, its long-term track record is still building. For a quiet, simple wall unit on a normal outlet, it is well worth a look.

-7%
Keystone 10,000 BTU Wall Air Conditioner and Dehumidifier

Keystone 10,000 BTU Wall Air Conditioner

Wall
Visit the Keystone
amazon.com
★ ★ ★ ★ ★
5.0 (10 reviews)
In Stock
$510.00 $549.99 Save $39.99
Updated: October 16, 2026
Price as of Oct 16, 2026. We earn from qualifying purchases.

As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated.

Key Specifications

FeatureSpecification
BrandKeystone
ModelKSTAT10-1E
TypeCooling-only through-the-wall air conditioner
Cooling Capacity10,000 BTU
Room SizeUp to 450 sq ft
Power115 volts, 1040 watts
RefrigerantR-32
Noise Level50.2 dB (listed)
DehumidifyingUp to 2.3 pints per hour
ControlsRemote with built-in thermostat, 3 modes, 3 fan speeds
Dimensions24.21 x 14.53 x 20.28 inches (W x H x D)
Weight67.2 pounds
In the BoxAir conditioner, remote, batteries, manual
Warranty1 year limited

Cooling Capacity and Room Size

Keystone rates the KSTAT10-1E for small to medium spaces up to 450 square feet, which sits at the top of the 10,000 BTU band in the ENERGY STAR chart below. It suits a primary bedroom, a nursery, a home office, a dorm room or a small living room. Keystone also mentions bathrooms and sheds, where a wall unit can be a tidy permanent option.

Three cooling modes, three fan speeds and 4-way adjustable louvers let you tune the airflow to the room.

ENERGY STAR publishes this general guide for sizing a room air conditioner by floor area:

Room Size (sq ft)Cooling Capacity (BTU/hr)
100 to 1505,000
150 to 2506,000
250 to 3007,000
300 to 3508,000
350 to 4009,000
400 to 45010,000
450 to 55012,000
550 to 70014,000
700 to 1,00018,000

Adjust for your room: reduce capacity by 10 percent for a heavily shaded room, increase it by 10 percent for a very sunny room, add 600 BTU for each regular occupant beyond two, and add 4,000 BTU if the unit cools a kitchen. Source: ENERGY STAR.

Follow Me Remote

Keystone’s remote takes the temperature where you are, displays it on its LCD screen and sends it to the unit every 3 minutes. The air conditioner then cools to that reading instead of the temperature at its own sensor. In a bedroom, keep the remote on the nightstand, and the unit will cool to the temperature at the bed rather than the wall.

Noise

Keystone lists 50.2 dB, which is low for a conventional 10,000 BTU wall unit. That makes the KSTAT10-1E one of the better non-inverter choices for light sleepers. Use sleep mode and the lowest fan speed at night for the quietest operation.

Energy Use

The unit draws 1040 watts on a standard 115 volt outlet. Energy saver mode cycles the fan off with the compressor once the room reaches your set temperature, and sleep mode automatically adjusts operation overnight to use less energy. The programmable 24 hour timer lets you cool the room only when you need it. Keystone’s listing does not give a clear efficiency rating, so we have not compared it on that figure.

Dehumidifying

The built-in dehumidification system removes up to 2.3 pints of moisture per hour. That is a useful figure for a 10,000 BTU unit, and it helps in muggy bedrooms, basements and bathrooms where damp air makes the room feel warmer.

Installation

The chassis measures 24.21 inches wide, 14.53 inches tall and 20.28 inches deep, and Keystone includes a universal interior trim kit for the indoor side. The listing does not include a sleeve, so reuse a compatible one or buy one separately, and confirm the fit with Keystone’s installation guide. At 67.2 pounds, it is a manageable two-person lift.

Power is simple: the unit plugs into a standard 115 volt outlet, so there is no new receptacle to install.

Maintenance

The mesh filter slides out for rinsing, and a check filter alert tells you when it is due. In peak season, clean it every couple of weeks, more often with pets. Outside, keep the rear grille clear of leaves and debris. A clean filter and clear grille do more for cooling and noise than any setting on the remote.

Choosing the Voltage Version

Keystone sells the same 10,000 BTU wall unit in two voltages. The KSTAT10-1E reviewed here plugs into a standard 115 volt outlet, while a separate version needs a high-voltage receptacle. Check the outlet beside your sleeve before ordering, because the plugs are different and the wrong version will not connect. For most apartments and homes with an ordinary outlet near the opening, this 115 volt model is the one to buy.

How It Compares

Against other 10,000 BTU wall units on a standard outlet, the KSTAT10-1E stands out for its listed sound level and follow me remote. Rivals from LG and Whirlpool offer longer track records, and TCL adds Wi-Fi. If quiet operation and accurate room temperature are your priorities, the Keystone has the edge. If app control matters most, look at a smart model instead.

Who It Suits Best

The KSTAT10-1E suits bedrooms, nurseries, offices and small living rooms up to 450 square feet with a standard outlet, especially for light sleepers. It is less suited to smart home users, large rooms, or anyone who wants a long ownership track record before buying.

Pros and Cons

ProsCons
50.2 dB listed sound levelNo Wi-Fi or app
Remote reads room temperatureSleeve not mentioned in listing
2.3 pints per hour dehumidifyingOnly 10 ratings so far
Runs on a standard 115V outletNo clear efficiency rating
Energy saver, sleep and timerNo heat mode

Who Should Buy It

Who Should Buy It?Who Should Look Elsewhere?
Light sleepersSmart home users
Bedrooms and nurseriesLarge living rooms
Muggy rooms that need moisture removalRooms that need heat
Homes with standard outlets onlyBuyers who want a long track record

For more options, see our picks for the best through-the-wall air conditioners for bedrooms and the best 10,000 BTU through-the-wall air conditioners.

Final Verdict

The Keystone KSTAT10-1E is a quiet, practical cooling-only wall unit for rooms up to 450 square feet, and its follow me remote makes the thermostat far more accurate in real use. It is an easy recommendation for bedrooms with a standard outlet. You can check the current price and details for the Keystone 10,000 BTU Wall Air Conditioner and Dehumidifier.

Frequently Asked Questions

How loud is the Keystone KSTAT10-1E?

Keystone lists 50.2 dB.

What size room does it cool?

Keystone rates it for spaces up to 450 square feet.

Does it need a special outlet?

No. It runs on a standard 115 volt outlet and draws 1040 watts.

How much moisture does it remove?

Up to 2.3 pints per hour.

About the author

Daniel Brooks
Daniel Brooks

Daniel Brooks is a home cooling editor at WikiCooling, covering window, portable, through-the-wall and mini-split air conditioners, fans, and dehumidifiers. He researches cooling capacity, energy efficiency, noise levels, installation requirements, and buyer feedback to help homeowners choose the right unit for their room size, climate, and budget.